Single Rear View Camera Mount

The standard single camera on many of the Roller Team models were fixed and if the bike rack is used would obscure your vision. So, I developed a mount that could be fitted in minutes, use the existing equipment and allow you then to tilt the camera to any viewing angle. From fully rear view to vertically downwards.

(tCamera not supplied)

Click here to read more or purchase Rear View Single Tilting Mount

Twin Rear View Camera Mount

The standard twin camera on many of the Roller Team models after 2021 had two fixed units. One directed at the bike rack (back of Motorhome) the other to view rear. However, these were very small it was felt that these were not as good as the earlier ones. This was mainly due to RT trying to fit two cameras in a very small area. So, I developed a twin version of the original single adjustable mount. This allowed owners to upgrade these units to better cameras and give both the same degree of adjustment. This has proved very successful in many installations.

Click here to read more or purchase Rear View Twin Tilting Mount incl Cameras

Roller Team Compatible Step Plates – Upgrade Your Motorhome!

Refresh your entrance with our durable, 3D-printed step plates, available in oval or rectangle designs. Unlike standard plates that fade, ours maintain their look and feature an enhanced Roller Team logo. Choose from Translucent, White, or Silky Grey—custom colours available on request. Stylish and built to last, they’re the perfect upgrade for your motorhome.

Click here to read more or purchase Roller Team Step Plates

Water Filler Cap Fiamma - Roller team Hozelock FAP

Filling fresh water into the roller team range can be done by standing there with a hose in the filler neck well all the splash backs go over your jeans or you can clip it on, go off to finish that cuppa well it gently fills. This water filler allows that task to be a little easier. 

Also fits Benimar, Roller Team, Hymer, Mobilvetta, Challenger, Foster and many more

Click here to read more or purchase Water Filler Cap Fiamma - Roller team Hozelock

Other Versions

A 32mm fitting used on some older or Van conversions using a simular but smaller filler neck Water Filler Cap With Hose Fitting (32mm Neck Hozelock type )

Screw in type

A conitinental threaded fitting used on some older models

Water Filler Cap With Hose Fitting (Continental Screw Thread Fitting 43mm Hozelock type )

Umbrella Storage Bracket

This unit has been very popular. It was developed after several trips taking the dog or popping to the toilet on those all-too-common rainy days. I wanted a way of storing the umbrella near the door when it was most needed, but also so I could return it after later ready for the next time but didn’t want it to take up too much space. This simple mount allows either easy stick and fix or screw on fitting. It has a small drip tray on the bottom to avoid water damage (assuming it has had most rain shaken off before storing). There is now two types. The Standard or Deluxe. The deluxe version allow removal if required, the fixing location is hidden and a slightly larger drip tray. All of these come in three colours, White - Grey - Black, but could do other colours if you want to make contact.

(Umbrella not supplied)

Click here to read more or purchase Motorhome Umbrella Storage Bracket

Motorhome Kuma Mobile Router Wall Mount

This unit allows you to have a permanent location for that mobile router. May be close to the usb socket or up high for maximium coverage always fully charged, always connected. Take your internet with you!

This unit also fits many other mobile routers.

(router not supplied)

Click here to read more or purchase Motorhome Kuma Mobile Router Wall Mount

Motorhome Universal Phone Wall Mount

This unit allows you to have a permanent location for your phone which is very useful to either free up valuable unit space or keep it high and charged if used for tethering, it also has small hooks for keys etc. The unit will adjust in width and fits most phones.

(Mobile not supplied)

Click here to read more or purchase Motorhome Universal Mobile Phone Wall Mount

Motorhome / Caravan / Camper / Manual Propane Gas Bottle Handle

Hand Wheel Converter Propane Gas Bottle.

This hand-wheel is designed to avoid the need to carry spanners which gets lost. We have all experienced the difficult task of getting a spanner into the tight confines of the gas bottle or storage cupboard. This has a large ergonomic grip. It also has holes which can be used with a turning bar if additional leverage is required.

Arrows to help when dealing with the left handed thread.

Click here to read more or purchase Manual Propane Gas Bottle Handle

Motorhome - Caravan -

Wall Mount Bracket with Torch

Enhance your motorhome or caravan experience with our versatile Wall Mount Bracket and Torch combo. Designed for convenience and safety, this essential accessory ensures you're always ready for those unexpected moments after dark.

• Evening walks with your dog
• Late-night trips to communal toilet or shower facilities
• Emergency situations where quick access to a torch is crucial
• Any other nighttime activities in and around your motorhome or caravan

What's Included:

• 1 x Wall Mount Bracket
• 1 x High-Quality Torch
• Installation Screws and Instructions

Click here to read more or purchase Motorhome - Caravan - Wall Mount Bracket with Torch

Set of 3 Fiat Ducato Carpet Retainers - Replacement to the genuine!

Secure Replacement Fixing Clips – Captive Top Mount Design

These clips are designed to replace the standard fixing clips, which are often easily dislodged due to their original design. My upgraded version features a more secure solution, using a 3 off in a set - screw-down method and a captive top mount for improved stability and durability. Perfect for preventing accidental knocks or kicks from loosening the fixings.

Click here to read more or purchase Set of 3 Fiat Ducato Carpet Retainers

Water Filler Cap With Hose Fitting (Continental Screw Thread Fitting 43mm Hozelock type )

Water Filler for 43mm Dia Continental thread (please check the opening size as some newer models were 40mm), allows clip on hose to be used to fill the water. It has a rubber seal to avoid excessive water leaking when filling it also has two water release holes in the top to warn of over filling or allow for over fill to be released.

The food safe water hose can be fitted if required. On some versions of the unit the neck narrows and adding the hose allows faster filling.

Please use the drawing to validate that the filler neck of your water storage is correct for this unit

Click here to read more or purchase Water Filler Cap With Hose Fitting (Continental Screw Thread Fitting 43mm Hozelock type )

Water Filler Cap With Hose Fitting (32mm Neck Hozelock type )

Water Filler for 32mm Dia opening (please check the opening size as some newer models were 40mm), allows clip on hose to be used to fill the water. It also has two water release holes in the top to warn of over filling and allow for over fill to be released and the air to release.

The food safe water hose can be fitted if required. On some versions of the unit the neck narrows and adding the hose allows faster filling.

Click here to read more or purchase Water Filler Cap With Hose Fitting (32mm Neck Hozelock type )